Factory For How To Use A Key Duplication Machine - Single Sided Key Clamp SN-CP-JJ-03 – Kukai

Product Detail

Single Sided Key Clamp SN-CP-JJ-03

Introduction:

This Single Sided Key Clamp is composed by the moving clamp block and fixed clamp block, left and right baffle and the base clamp. The moving and fixed clamp blocks is made of by 45# quenched and tempered steel. The left and right baffle adopted the opposite shape is bending after go through cold rolled plate, using the internal spring and the axis to swirl the handle then achieve the lock’s locking and unstuck.

How to Calibrate #3 Single Sided Key Clamp on SEC-E9 Key Machine:

When you need to cut single sided keys through SEC-E9, you should firstly do calibration for the #3 Single Sided Key clampls.(Usually you should do calibration work for a certain time to keep the key machine always cutting out high precision keys, such as one time per month.) In order to teach you step by step how to do calibration, we make a vedio tutorial as below:

Product Tags

Key Cutting Machine Duplicator