How to duplicate new Volkswagen HU162T keys by Alpha automatic key cutting machine
Click “Duplicate” and “Internal Groove” button
Select “Tip” and “S1-B”image
Fix original key on ”S1-B” jaw
Please remember use 1.5mm cutter to cut HU162T keys on “S1-B” jaw
Firstly, press the image to start duplicating side A1 of original key
Duplicate done
Then take out original key and replace the right decoder with 1.5mm cutter
Fix a new key blank on S1-B jaw
Click “Cut” button to start cutting (close the shield)
A1 cutting done
Fix A2 of key on S1-B jaw
A2 cutting done
Second, duplicate B1 of original key which have a small groove in it
Click “Single External Groove” and “Down Single Track Tip” button
Select “S1-B” image (side face)
Fix original key on S1-B jaw vertically
Press the S1-B to start duplicating B1 of original key
Duplicate done
Take out original key and fix the new key blank on S1-B jaw
Click “Cut” button to start cutting (close the shield)
B1 cutting done
Third, fix original key on S1-B jaw vertically
To start duplicating B2 of original key
Duplicate done
Take out original key and fix the new key blank on S1-B jaw
Click “Cut” button to start cutting
Cutting is done
Tips:
We use 1.5mm cutter as an example in this video,but you can use 1.5-1.9mm cutter to cut HU162T keys
Please adjust the cutter dimension with the range of 1.5-1.9mm in software based on the actually used cutter
Alpha automatic key cutting machine support to duplicate keys without key data in database
Including single standard, double standard, single external groove,double external groove,internal groove and tubular
We use the HU162T as an example,if any question and details please let’s we know
Below as the video,please check it