A. Please strictly follow below links to do calibration step by step:
Beta (J01):
Alpha (J01):
Three situations that you will need to do calibration:
1). When you receive the machine in the first time.
2). When you change the key jaw, decoder and cutter.
3). When the machine cannot cut a key correctly.
B. Please make sure you choose right position when clamping;
1). Fix the key according to the default clamping position and clamping side in the software.
2). When clamping shoulder aligning keys, please use the positioning stop.
C. Please make sure the key is fixed flatly on key jaw, especially for standard keys;
D. Please make sure there are no metal chipping pasted in the clamp ,decoder or cutter;
E. Please make sure decoder and cutter are original, corresponding ones;
1). Use dimple decoder and cutter for Dimple keys.
2). Non-conductive keys( Plastic/Aluminum) can not be decoded, and need special cutter.
3). Other cutters for some special keys, e.g. Medeco cutter, Keso cutter, SAG cutter, Engraving cutter, Non-conductive key cutter etc..
F. Please make sure you use right key blank;
G. Please make sure you choose right key data information;
There are 5 ways about how to go to key data information:
1). Car keys/ House keys– Model list-Manufacturing year.
2). Search– Keyblank/ID (This is priority if you are much familiar with them).
3). All key lost–Cut by key code.
4). Lishi tool–Manufacturer/Tool model.
5). Favorite–Create your Favorites list for the fastest way for enter to your most commonly used keys.
H. You may can’t cut key correctly if original key is worn too much (please don’t select “round off” under this situation).
You can also use “Adjustment” to adjust the space and width if necessary.
I. It may show white/black numbers and red numbers when decoding without “round off”.
White/black numbers are integer that means there is no Error, while red numbers is decimal that means there is an error, but please note that it’s normal if the
tolerance of error is 0.2.
J. Please make sure the cutter you use is the same as the spec you choose in the software.
K. Please don’t change the cut speed if no special situation, they are all defaulted.
L. Please don’t select “Cleanup Cut” when cutting new keys.
Please contact the tech support if you got any problem
WhatsApp: +86 18711031899
Wechat: +86 17773197112
Email: support@kkkcut.com
Hunan Kukai Electromechanical Co., Ltd
2026.03.19